Repairs and quotes — 07818 554080
NextGen Garage Doors

Roofs & cladding

Garage cladding, fascias and soffits

The difference between a garage that has been repaired and one that looks new is almost always the trim. Cladding covers the tired timber for good.

Most garages carry a lot of exposed softwood — the fascia along the front, the bargeboards up the gable, the posts either side of the door. It is the first thing to go and the last thing anyone gets round to, and once it has gone soft it takes paint for about a season.

Cladding it over in coated steel or uPVC ends the maintenance. We match it to the door and the roof, so a garage that has had door, roof and cladding done reads as one job rather than three.

Garage with flaking white up-and-over door and a rotten timber flat roof
Before
The same garage with a new box-profile roof, anthracite door and white cladding
After
Two different angles

Tired garage brought back from the brink

The old up-and-over had lost most of its paint and the flat roof had gone back to bare, rotten boards. Roof, door, fascia and side cladding were all replaced in one visit - a new box-profile roof, anthracite door and white cladding right round.

Detail

What that means on the job

Rotten timber dealt with first

Anything structural gets replaced. Cladding over soft timber hides the problem rather than fixing it.

Colour-matched throughout

Fascia, bargeboard, corner trim and door in the same colour family, so it looks designed.

Posts and reveals included

The timber posts either side of the door take the worst of it. Clad or replaced as part of the job.

No more painting

Coated steel and uPVC need washing down, not repainting.

Before you decide

Straight answers

The part of the conversation most quotes leave out.

Right for you if

  • Softwood fascias and bargeboards that will not hold paint any more
  • Timber posts either side of the garage door that have gone at the base
  • Finishing off a new roof so the edge detail matches
  • Making a mixed-material garage look like one building

Worth knowing first

  • Cladding is a finish, not a repair. If the timber behind it is structural and rotten, that gets replaced first and it is priced separately.
  • It will not fix damp coming through a wall from the outside.

Specification

What you are actually getting. If something here does not suit your garage, say so and we will price the alternative.

Specification
MaterialsCoated steel and uPVC
ColoursAnthracite, black, white, cream, woodgrain foils
CoversFascia, soffit, bargeboard, gable, corner posts, door reveals
FixingsColour-matched, into sound timber or masonry
MaintenanceWash down; no repainting
Typical durationHalf a day to a day alongside a roof or door

Our work

This job, done

Real jobs, our own photographs.

See all our work
Garage with flaking white up-and-over door and a rotten timber flat roof
Before
The same garage with a new box-profile roof, anthracite door and white cladding
After
Two different angles

Tired garage brought back from the brink

The old up-and-over had lost most of its paint and the flat roof had gone back to bare, rotten boards. Roof, door, fascia and side cladding were all replaced in one visit - a new box-profile roof, anthracite door and white cladding right round.

Questions

Common questions

Can you clad over the timber that is already there?

Only where it is sound. Anything soft comes out first. We check it at the survey and the quote says which it is.

Will it match my new garage door?

That is the point of doing them together. Anthracite door, anthracite fascia and trims is the combination we fit most often.

Do you do the house as well as the garage?

Fascias and soffits on the house, yes, where we can reach them safely. Anything needing a scaffold gets priced with the scaffold in it.

Also worth a look

While we are there

Get a price for cladding, fascias & soffits

Send a photograph and a postcode and we will come back with a figure. If it is a repair and the door is stuck, ring instead — we prioritise those.

Call 07818 554080 Get a quote